NVQ Level 2 – Manual Roadbuilding
DMR Training is an approved assessment centre for the NVQ Level 2 Diploma in Roadbuilding and Maintenance (Construction) – Manual Roadbuilding.
Who Should Take the Manual Roadbuilding NVQ Level 2?
The NVQ Level 2 Diploma in Roadbuilding and Maintenance (Construction) – Manual Roadbuilding is intended for competent highway operatives carrying out a recognised manual roadbuilding or maintenance process. It confirms the ability to undertake the specialist work safely and to the required standard on live contracts.
Please note that the official title of the qualification is Level 2 NVQ Diploma in Roadbuilding and Maintenance (Construction) – Manual Roadbuilding (qualification number 603/3519/1). Manual roadbuilding pathways cover operations such as cold and hot applied high-friction surfacing, resin-bound or resin-bonded surfacing, slurry surfacing, thermal repair, crack and joint repair and manual pavement marking.
We deliver the qualification through the On-Site Assessment and Training (OSAT) route. Assessment is planned around your real work, supported by occupationally competent assessors and evidence matched to the chosen units. You will not need to take time off work. Please refer to ‘Entry Requirements’ and ‘Assessment Process’ for examples of the activities and evidence expected.
Successful learners receive a Level 2 qualification certificate. Any CSCS, CPCS or NPORS occupational card is subject to the relevant card scheme’s own application requirements.
Entry Requirements for the Manual Roadbuilding NVQ
There is no fixed number of years of experience or prior NVQ required for this qualification. To undertake the Manual Roadbuilding Diploma as a workplace-based NVQ, you should:
- Meet the awarding organisation minimum age of 16 years.
- Be working in a relevant role with access to real construction-site assessment opportunities.
- Be capable of demonstrating the knowledge and practical performance required by the selected route and units.
We will complete an initial skills scan to check your work activities, access to resources, specialism and suitability. The qualification is achieved by meeting all of the relevant competence criteria. There is no automatic award based on time served.
Typical work activities include:
- Planning and preparing a manual road surfacing or repair activity.
- Interpreting specifications, surface condition and traffic management controls.
- Checking material properties and preparing surfaces or joints as appropriate.
- Applying materials using the specified manual methods and PPE.
- Controlling public exposure, dust, fumes, chemicals and hot materials where relevant.
- Inspecting finish, tolerances, site restoration and work records.
These examples are indicative. Your assessor will match practical tasks and evidence to the actual qualification and approved pathway and unit requirements.
The Manual Roadbuilding Diploma includes several routes. The chosen operation must be one of the approved specialisms and supported by your actual site tasks.
How Is the Manual Roadbuilding NVQ Assessed? At Your Workplace
This is an occupational competence NVQ assessed using authentic work evidence in a real workplace. Once we have enrolled you, we will assign you an occupationally competent assessor who maps your evidence and discusses any gaps against the approved performance and knowledge standards.
Evidence may include:
- Direct observation by an occupationally competent and qualified assessor while you perform relevant tasks.
- Dated photos or video where permitted as supporting evidence, with you and the job clearly identified.
- Authentic witness testimony from an occupationally competent person with direct knowledge of your work.
- Site records, drawings, inspection sheets, permits, daily records and other work products attributable to you.
- Recorded professional discussions to address decisions and underpinning knowledge.
- Knowledge questions and answers mapped to the appropriate unit criteria.
You must also demonstrate safe systems of work and relevant workplace knowledge, including:
- Site inductions, RAMS, PPE, reporting unsafe conditions and emergency arrangements.
- Plant and vehicle movement, banksmen, segregation of people and machinery.
- Manual handling, lifting operations, working at height and secure access.
- Underground and overhead services, slips/trips and changing ground conditions.
- Noise, vibration, dust, COSHH, environmental controls and safe waste handling.
When all of the required criteria have been met, our internal quality assurance team checks the assessment decisions before your certificate is claimed from the awarding organisation.
How Long Does the Manual Roadbuilding NVQ Take?
Our planning indication is approximately 3 to 6 months depending on live specialist work opportunities. This is not a fixed course length set by the awarding organisation, and it is not an enrolment guarantee. The actual assessment period depends on the range and timing of work, your readiness and satisfactory evidence.
As an example, the Cold Applied High Friction pathway is published with 600 hours of total qualification time and a minimum of 200 guided learning hours. Other Manual Roadbuilding routes differ. Total qualification time is not the same as days in the classroom. A tailored assessment plan is agreed at induction.
Qualification and Card Options After Level 2
Where the selected route is accepted by the relevant card scheme, the completed NVQ may support a skilled-worker card application. The exact road-surfacing occupation and the current Health, Safety and Environment test and card criteria are confirmed before you apply.
Holding an NVQ does not automatically provide or renew a card. Temporary, trainee or experienced-worker routes depend on the rules of the individual scheme and cannot be assumed to apply to every plant or roadbuilding category.
Check the current CITB Health, Safety and Environment test type and validity, the precise occupation or category, and any CPCS or NPORS operational testing requirements before submitting a card application.
Manual Roadbuilding NVQ Cost & Funding
Please visit our Funding & Grants page to check whether an eligible learner, employer, region or contract can receive support. Funding is not guaranteed by the qualification title alone.
We will provide current self-funded course fees and any approved instalment options. Plant and specialist highway assessment costs may vary with location, travel, equipment category and visits.
Please get in touch for fees, programme availability, funding checks and card eligibility advice.
NVQ Level 2 Manual Roadbuilding Course Units
MANDATORY UNITS
The unit combination must match the exact pathway you are registered on. As a verified example, the Cold Applied High Friction pathway has three mandatory units:
- Conforming to General Health, Safety and Welfare in the Workplace (A/503/1170)
- Conforming to Productive Working Practices in the Workplace (J/503/1169)
- Manually applying high friction (cold applied) surfacing materials in the workplace (J/617/1393)
SPECIALIST UNITS
The example high-friction pathway has no optional unit requirement.
Other Manual Roadbuilding routes have different occupational units and rules. We confirm the unit schedule for your specialism at your skills scan.
Progression After Level 2
Successful learners may progress to more complex trade or plant duties, additional categories, experienced-worker recognition or a supervisory role where they have the relevant responsibilities and workplace experience.
A possible next step is the NVQ Level 3 in Occupational Work Supervision (Construction), subject to job role, experience and appropriate assessment opportunities.
You can also browse all our construction NVQs to compare levels and related qualifications.
Getting Started with Your Manual Roadbuilding NVQ
Contact us for a skills scan. We will identify the exact specialism, review evidence opportunities and check any relevant plant category, current qualifications or safety training.
Once the route is confirmed, we will agree an assessment plan, enrol you on the correct qualification and introduce your assessor. Any card application is handled separately from NVQ certification.
For an initial commitment-free consultation, please call us on 01942 673047 or send us your details, and we will get back to you.
Course Information
The NVQ Level 2 Diploma in Roadbuilding and Maintenance – Manual Roadbuilding is for experienced manual road-surfacing and maintenance operatives who meet the recognised occupational standards.
The qualification validates the skills and experience you have gained during your career.
- 3-6 Months
- Funding Available
Ready to take the next step in your career?
Contact us today to discuss your training needs and discover how we can help you achieve your goals with our flexible courses and funding options.
Frequently Asked QUESTIONS
Common queries about the CITB Levy and Grant system
What are the benefits of gaining a manual roadbuilding NVQ Level 2?
A manual roadbuilding NVQ pays back in earning potential, career prospects and your occupational card – our short guide Why Should You Do an NVQ? explains.
Who will assess my NVQ?
Before starting your qualification, an assessor will be assigned to work with you and provide ongoing support.
DMR assessors are former construction workers with at least five years’ experience in NVQ assessment.
Each assessor holds an A1 or TAQA assessor’s qualification, at least an NVQ Level 2 in their occupational area, and a blue or gold CSCS card.
Can you provide support if I am dyslexic or have a learning disability?
We provide full training to all our assessors in supporting people with a learning disability or dyslexia. If you need extra support and guidance with the written elements of your manual roadbuilding NVQ, your assessor will draw up an assessment plan tailored to your needs.
Where will my NVQ take place and what will I need to do?
An NVQ is a workplace competency qualification. As a competent manual roadbuilding operative, you will be expected to document your skills and experience through various types of ‘evidence’.
Your assessor will carry out at least one observation in your place of work. You will also complete coursework in your own time.
To achieve your qualification, you will not need to travel, there are no exams to sit, and you will not need to take time off work. Your assessor will provide support and guidance face-to-face, by phone and by email.
Are grants or funding available?
Funding depends on the learner, employer, region and the programme rules that apply. Please get in touch with us to find out if you are eligible for funding, or visit our Funding & Grants page.
How long will it take to get my certificate after I finish my NVQ?
When you have completed your NVQ portfolio, our internal quality assurance team will check it for compliance. They will then claim your certificate with the awarding organisation. Once we have received your certificate, we will forward it to you by recorded delivery. This process usually takes between two and four weeks.
How do I apply for my road surfacing skill card?
Card entitlement is decided by the card scheme for your exact occupation or plant category, not by the NVQ on its own. Once you have your certificate we will advise on the correct route, which may be CSCS, CPCS or NPORS depending on your work, and you will need a current pass in the appropriate CITB Health, Safety and Environment test.
Can I get a temporary card while I do my NVQ?
Temporary, trainee or experienced-worker cards depend on the rules of the individual scheme and are not available for every plant or roadbuilding category. Ask us at your skills scan and we will check what applies to your occupation before you apply.
How do I apply to start my manual roadbuilding NVQ or find out more information?
You can call us on 01942 673047 or get in touch through our contact form.