LEVEL 3 - SITE CARPENTRY

DMR Training is an approved assessment centre for Level 3 NVQ Diploma in Wood Occupations – Site Carpentry. We aim to help you gain your carpentry and joinery NVQ as quickly and conveniently as possible.

ABOUT THIS NVQ

WHO SHOULD TAKE NVQ LEVEL 3 SITE CARPENTRY?

Example of a Gold Skilled Worker card

The NVQ Level 3 in Site Carpentry course is for carpenters and joiners who meet the recognised occupational standards. The qualification validates the skills and experience you have acquired during your construction career.

Although the site carpentry NVQ is suitable for experienced joiners from various backgrounds, it will be to your advantage if you already have experience working on a construction site.

Depending on your level of skill and experience, you may elect to take the Level 2 Site Carpentry NVQ first if you haven’t already but this is not mandatory. Jump straight in at Level 3 if you have experience!

Please see the ‘Entry Requirements’ and ‘Assessment Process’ sections of this page for examples of assessment criteria for the site carpentry NVQ.

We deliver the course through the Onsite Assessment and Training (OSAT) route. This assessment method allows you to work towards the qualification at your own pace. It is a workplace and evidence-based qualification; classroom or workshop learning is rarely required. You will not need to take any time off work.

Once you have completed your NVQ Level 3 and received your certificate, you can apply for the blue CSCS card (Gold Skilled Worker card).

Please note that the official title of this qualification is Level 3 NVQ Diploma in Wood Occupations – Site Carpentry.

To undertake a Level 3 NVQ in carpentry and joinery, you must meet the following criteria:

  • Minimum of three years experience in carpentry and joinery.
  • Must currently be working as a joiner.
  • Aged 19+. 

Although an NVQ is technically a pass or fail qualification, we will only enrol you if we are confident in your ability to complete the course. To plan your assessment programme, your assessor will check your level of experience in some of the skills listed below. This pre-enrolment skills check will also confirm that you have enough trade experience to successfully achieve your carpentry NVQ.

  • Interpreting and working to drawings, specifications, architects’ drawings and schedules.
  • Protecting the surrounding area while working and maintaining a clean workspace by disposing of waste products.
  • Working in line with risk assessments and method statements (RAMS) whilst carrying out various carpentry tasks.
  • Knowledge and application of carpentry hand and power tools.
  • Protecting the surrounding area while working.
  • Knowledge and application of carpentry skill and competence in first fix, second fix, structural carcassing, fire door installation sets and maintenance and repairs.
  • Ordering carpentry materials and supplies.
  • Supervising other workers (if relevant) and communicating with site managers and clients.

The list above is not exhaustive. It is designed to give you examples of the skills you will need to achieve your NVQ Level 3 in Site Carpentry.

To achieve the NVQ Level 3 in Site Carpentry, you will also need experience in two out of three specialist areas:

  • Structural carcassing components
  • Roof structure carcassing components
  • Maintaining non-structural and structural components.

See requirements section for a full list of optional units.

At the beginning of your Joinery NVQ Level 3, we will assign you an experienced assessor who will work with you for the entirety of the course as you build a portfolio of work-based evidence.

Types of evidence may include:

  • An onsite observation while you work, carried out by your assessor in your workplace. An observation is not a test or a practical exam; your assessor is simply looking for evidence of your competency and that you follow safe working practices.
  • Photographs or videos of you working. You can take these yourself or ask a workmate to take them for you. Your assessor will provide guidance on photographic evidence during your induction phone call.
  • References, employer endorsements or witness testimonies verifying your work as a bricklayer. You can submit historical references and testimonies from work you have done in the past.
  • Detailed job logs of work you have completed during your bricklaying NVQ.
  • A recorded professional discussion with your assessor either face-to-face or over the telephone.
  • Coursework covering the ‘theory’ of bricklaying, and construction health and safety. This is presented as a straightforward Q&A pack. You can choose to handwrite your answers, type them on a word processor, or record them verbally.

During the NVQ, your assessor will help you gather evidence of your joinery competency (some examples are listed in the ‘Entry Requirements’ section). You will also need to provide evidence of your knowledge and application of construction health and safety. This will include:

  • Complying with information presented in risk assessments.
  • Knowledge of procedures for reporting accidents and emergencies.
  • Proper use of PPE such hi vis clothing and hard hats.
  • Disposing of waste safely in accordance with legislation.

Once your assessor is satisfied you have submitted sufficient evidence, our internal verification team will check your portfolio. They will then claim your NVQ certificate with NOCN.

Although joiners can take up to six months or more to achieve their Level 3 NVQ, we find that most complete the qualification in 3 to 4 months.

Ultimately, the qualification will fit around your professional and personal commitments. Work towards it at a speed you feel comfortable.

Please visit our Funding & Grants page to check if funding is available for your NVQ.

If you are ineligible for government support, we offer affordable self-funded assessment payable in four instalments of 25%.

Please contact us to discuss funding and costs.

On completion of your Level 3 Site Carpentry NVQ course, you can apply for your Gold Skilled Worker card.

If you require a CSCS card while you are working towards your NVQ, you can apply for your temporary Experienced Worker card (red card).

All CSCS card applicants must first pass the CITB Health, Safety and Environment test (HS&E test).

After achieving Level 3 and depending on your experience, you may have the option to NVQ Level 3 in Occupational Work Supervision (Joinery) or NVQ Level 4 in Construction Site Supervision.

When you decide to proceed with your NVQ, we will carry out a quick skills diagnostic to confirm your suitability for the qualification and the onsite assessment route.

We will then enrol you on the qualification with NOCN and issue your welcome email. Your assessor will contact you for your introductory telephone conversation and put together your assessment action plan.

For an initial commitment-free consultation, please call us on 01942 673047 or send us your details and we will get back to you.

REQUIREMENTS

MANDATORY UNITS

Candidates must complete the seven mandatory units

  • Confirming the Occupational Method of Work in the Workplace
  • Confirming Work Activities and Resources for an Occupational Work Area in the Workplace
  • Conforming to General Health, Safety and Welfare in the Workplace
  • Developing and Maintaining Good Occupational Working Relationships in the Workplace
  • Installing Bespoke First Fixing Components in the Workplace
  • Installing Bespoke Second Fixing Components in the Workplace
  • Setting Up and Using Transportable Cutting and Shaping Machines in the Workplace

ADDITIONAL UNITS

Candidates must complete two units from the optional unit group

  • Erecting Roof Structure Carcassing Components in the Workplace
  • Erecting Structural Carcassing Components in the Workplace
  • Maintaining Non-structural and Structural Components in the Workplace

APPLY NOW

For an initial commitment-free consultation about your NVQ please call us on 01942 673047 or register your interest via the APPLY NOW link.

Once we receive your enquiry, a member of our training and assessment team will contact you to discuss your NVQ and answer any questions you have.

INDIVIDUAL APPLICANTS

If you’re an employee or self-employed worker interested in NVQ assessment for yourself, please send us your enquiry via the link below.

EMPLOYERS & COMPANIES

If you’re enquiring about a group booking on behalf of your company, please use the link below.

FAQs

There are several reasons you might take an NVQ, ranging from increased earning potential and career prospects, to gaining your CSCS card. See our short guide – Why Should You Do an NVQ?

Before starting your qualification, an assessor will be assigned to work with you and provide ongoing support. DMR assessors are former construction workers with at least five years’ experience in NVQ assessment. They hold an A1 or TAQA assessor’s qualification, a minimum of NVQ Level 2 in their occupational area and a blue or gold CSCS card.

We provide full training to all our assessors in supporting people with dyslexia or learning disabilities. If you need extra support and guidance with the written elements of your carpentry and joinery NVQ, your assessor will draw up an assessment plan tailored to your needs.

A Level 3 NVQ is a workplace competency qualification. As a competent joiner, you will be expected to document your skills and experience through various types of ‘evidence’.

Your assessor will carry out at least one observation in your place of work. You will also complete coursework in your own time.

To achieve your qualification, you will not need to travel, there are no exams to sit, and you will not need to take time off work. Your assessor will provide support and guidance face-to-face, by phone and by email.

CITB-registered employers can claim a grant of £600 for every employee or contractor who completes an NVQ Level 2 to 7. You can find more information on the CITB website.

Government NVQ funding is available for construction workers who meet specific criteria. Please get in touch with us to find out if you are eligible for funding or visit our Funding & Grants page.

When you have completed your Joinery NVQ Level 3 portfolio, our internal verification team will check it for compliance. They will then claim your certificate with NOCN. Once we have received your certificate from the awarding body, we will forward it to you by recorded delivery. This process usually takes between two and four weeks.

To get your CSCS Gold Skilled Worker card, you will also need to pass the CITB Health, Safety & Environment Test at your local test centre.

You can apply for your card by visiting www.cscs.uk.com/applying-for-cards. You will need to upload a copy of your NVQ certificate and have a debit or credit card ready to pay the £36 fee.

Yes, if you need a CSCS card while you are doing your qualification, you can apply for the Experienced Worker card. You can request this card as soon as we have enrolled you on the NVQ (you will also need to pass the CITB Health, Safety & Environment Test).

To apply for the temporary card, we will email you your proof of enrolment which you must submit to CSCS.

You will then upgrade to the Gold Skilled Worker card once you have finished the qualification.

You can call us on 01942 673047 or get in touch through our contact form.

Scroll to Top